John Fairbankstainless steel strip with good quality and the Sales clerk service is very good.i like this company i hope can work with your again
FleuriauShipment speed is very fast, and the requirements can meet me. Salesman is very responsible.
Fierce Urchingood ,the galvanized steel coil quality is good and i donot see the broken on them.that is nice
Thin Gauge Stamped Polished Stainless Sheet Cladding Slit Edge For Kitchen Walls
|Place of Origin:||CHINA|
|Brand Name:||JIN LAI|
|Minimum Order Quantity:||3 tons|
|Packaging Details:||Standard export packing (waterproof paper + steel rings), or as your requirement|
|Delivery Time:||ship within 10 days after received the advance|
|Payment Terms:||T/T, Western Union, L/C|
|Supply Ability:||3000 tons per month|
|Standard:||JIS, AISI, ASTM, GB, DIN, EN, SUS||Technic:||Cold Rolled|
|Finish:||Requirement||Edge:||Slit Edge / Mill Edge|
brushed stainless steel plate,
cold roll steel sheets
304 Structural Stainless Steel Sheet , Mirror Finish Stainless Steel Sheet 4x8 Decorative
|Hot rolled plate|
|Big Deviation||Normal Deviation||Small Deviation||No Deviation|
|3.0mm||2.6mm-2.75mm||2.75mm-2.85mm||2.86mm-2.9mm||no less than 2.9mm|
|4.0mm||3.5mm-3.6mm||3.6mm-3.75mm||3.76mm-3.95mm||no less than 3.95mm|
|5.0mm||4.5mm-4.6mm||4.6mm-4.75mm||4.75mm-4.95mm||no less than 4.95mm|
|6.0mm||5.4mm-5.6mm||5.6mm-5.75mm||5.75mm-5.85mm||no less than 5.85mm|
|8.0mm||7.3mm-7.5mm||7.5mm-7.65mm||7.65mm-7.85mm||no less than 7.85mm|
|10.0mm||9.2mm-9.3mm||9.3mm-9.6mm||9.6mm-9.85mm||no less than 9.85mm|
|12.0mm||11.1mm-11.2mm||11.2mm-11.6mm||11.6mm-11.85mm||no less than 11.85mm|
|14.0mm||13.1mm-13.2mm||13.2mm-13.6mm||13.6mm-13.85mm||no less than 13.85mm|
Hot-rolled steel sheet, mechanical properties are far less than cold processing, second only to forging, but with good toughness and ductility
Heat Resistance :
Grade 430 resists oxidation in intermittent service up to 870°C and to 815°C in continuous service. This grade may become brittle at room temperature after prolonged heating in the 400-600°C range. This effect can be eliminated by annealing.
|430 stainless steel chemical composition|
|430 physical properties|
|Tensile Strength:||σb (MPa)≥450|
|Yield strength :||σ0.2 (MPa)≥205|
|410 Chemical composition:|
|Tensile strength σb (MPa)||Conditions yield strength 0.2 sigma (MPa)||Elongation % (min)||Hardness|
Excellent weldability by all standard fusion and resistance methods, both with and without filler metals. Heavy welded sections in Grade 201 require post-weld annealing for maximum corrosion resistance.
Stainless steel tends to work harden if machined too quickly. For this reason low speeds and constant feed rates are recommended.
Different kinds of finish sevices
If you have any question, please feel free to contact us any time.