• Wuxi Jinlai Mechanical Processing Co., Ltd.
    John Fairbank
    stainless steel strip with good quality and the Sales clerk service is very good.i like this company i hope can work with your again
  • Wuxi Jinlai Mechanical Processing Co., Ltd.
    Fleuriau
    Shipment speed is very fast, and the requirements can meet me. Salesman is very responsible.
  • Wuxi Jinlai Mechanical Processing Co., Ltd.
    Fierce Urchin
    good ,the galvanized steel coil quality is good and i donot see the broken on them.that is nice
Contact Person : Jo Yuan
Phone Number : +86-18706170710
WhatsApp : +8618706170710

Mill Edge 410 Stainless Steel Plate 400 Series 0.3-3mm Thickness ASTM Standard

Place of Origin: CHINA
Brand Name: JIN LAI
Certification: ISO
Model Number: 410
Minimum Order Quantity: 3 tons
Price: negotiable
Packaging Details: Standard export packing (waterproof paper + steel rings), or as your requirement
Delivery Time: ship within 10 days after received the advance
Payment Terms: T/T, Western Union, L/C
Supply Ability: 3000 tons per month
Product Details
Standard: JIS, AISI, ASTM, GB, DIN, EN, SUS Technic: Cold Rolled
Finish: Requirement Edge: Slit Edge / Mill Edge
Length: As Reruested Width: Customized
Thickness: 0.3-3mm Color: Silver
High Light:

cold roll steel sheets

,

custom stainless steel sheet

Leave a Message
Product Description

Decorative 410 Stainless Steel Metal Plate For Commercial Kitchen Walls

 

Cold Rolled Stainless Steel Sheet / Plate:

a. Stretch good, toughness, but the price is more expensive;
b. Cold rolling processing surface without oxide skin, good quality;
c. Cold rolling is generally used in the production of strip, the rolling speed is high;
d. Cold rolling than the thickness of the high precision. Mechanical properties, surface and so on in the hot rolling;
e. Cold-rolled steel coil due to a certain degree of work hardening, low toughness, but can achieve better yield ratio, used for cold-formed spring and other parts;
f. Cold coil yield point closer to the tensile strength, so the use of risk in the process of no predictability, when the load exceeds the allowable load prone to accidents
g. The surface of the cold rolled steel coil without plating is gray.
h. Cold rolled steel plate surface smoothness is higher than the hot rolled steel coil.

 

410 stainless steel is produced according to the American ASTM standard stainless steel brand, equivalent to China's 1Cr13 stainless steel, S41000 (AISI, ASTM).Carbon 0.15%, chromium 13%,410 stainless steel: good corrosion resistance, machinability, general purpose edge, valve.Heat treatment of 410 stainless steel: solution treatment (℃) 800-900 slow cooling or 750 fast cooling.

 

Description:

  • Grade : 410S / 410
  • Thickness : 0.3-3mm
  • Tolerance : +/- 0.02mm
  • Width: 1000mm 1219mm 1220mm 1240mm 1500mm or as customized
  • Length : 2000mm 2400mm 2440mm 3000mm 2500mm or as customized
  • Mill : BAOSTEEL
  • Trade term :FOB, CFR, CIF, CNF , EXW

 

410 Chemical composition:
C Si Mn Cr Ni S P
0.15 ≤1.0 ≤1.0 11.5~13.5   ≤0.03 ≤0.04
mechanical properties:
Tensile strength σb (MPa) Conditions yield strength 0.2 sigma (MPa) Elongation % (min) Hardness      
260 470 30 ≤210HV      

 

Cold rolled: Hot rolled coil is used as raw material, and the oxide skin is removed by pickling. The product is rolled coil. The cold work hardening caused by continuous cold deformation makes the strength, hardness and toughness and plasticity of rolled coil increase, so the stamping performance will deteriorate and can only be used for parts with simple deformation. Rolled coil can be used as raw material for hot galvanizing plant because annealing lines are set up in hot galvanizing units. The weight of rolled coil is generally 6-13.5 tons. The hot rolled pickling coil is rolled continuously at room temperature. The inner diameter is 610 mm.

 

 

 
Cold rolled plate
Specification
(Thick)
Big Deviation Normal Deviation Small Deviation No Deviation
0.4mm 0.3mm-0.32mm 0.33mm-0.37mm 0.37mm-0.39mm no less than 0.39mm
0.5mm 0.4mm-0.42mm 0.43mm-0.47mm 0.47mm-0.49mm no less than 0.49mm
0.6mm 0.5mm-0.52mm 0.53mm-0.56mm 0.57mm-0.59mm no less than 0.59mm
0.7mm 0.6mm-0.62mm 0.63mm-0.67mm 0.67mm-0.69mm no less than 0.69mm
0.8mm 0.7mm-0.72mm 0.73mm-0.77mm 0.74mm-0.79mm no less than 0.79mm
0.9mm 0.8mm-0.82mm 0.83mm-0.87mm 0.87mm-0.89mm no less than 0.89mm
1.0mm 0.89mm-0.9mm 0.91mm-0.94mm 0.94mm-0.99mm no less than 0.99mm
1.2mm 1.02mm-1.08mm 1.09mm-1.15mm 1.16mm-1.18mm no less than 1.18mm
1.5mm 1.32mm-1.38mm 1.39mm-1.45mm 1.46mm-1.48mm no less than 1.48mm
2.0mm 1.72mm-1.79mm 1.8mm-1.86mm 1.87mm-1.9mm no less than 1.9mm
2.5mm 2.23mm-2.36mm 2.32mm-2.42mm 2.42mm-2.47mm no less than 2.48mm
3.0mm 2.7mm-2.77mm 2.78mm-2.85mm 2.85mm-2.9mm no less than 2.9mm

 

Factory and Machinery Equipment :

 

We had our own factory to do slitting re-rolling and finish treatment machine,PVC and interleaving paper we will using with our machine for you,could protect stainless steel surface from damage or any scratches,

 

1. CNC Flame Cutting Machine

2. CNC Plasma Cutting Machine

3. CNC Laser Cutting Machine

4. Bending Machine

5. Shearing Machine

6. Punch Machine

7. Driving Machine

 

 

Different kinds of finish sevices

Mill Edge 410 Stainless Steel Plate 400 Series 0.3-3mm Thickness  ASTM Standard 0

 

Process machine

Mill Edge 410 Stainless Steel Plate 400 Series 0.3-3mm Thickness  ASTM Standard 1

Mill Edge 410 Stainless Steel Plate 400 Series 0.3-3mm Thickness  ASTM Standard 2