• Wuxi Jinlai Mechanical Processing Co., Ltd.
    John Fairbank
    stainless steel strip with good quality and the Sales clerk service is very good.i like this company i hope can work with your again
  • Wuxi Jinlai Mechanical Processing Co., Ltd.
    Fleuriau
    Shipment speed is very fast, and the requirements can meet me. Salesman is very responsible.
  • Wuxi Jinlai Mechanical Processing Co., Ltd.
    Fierce Urchin
    good ,the galvanized steel coil quality is good and i donot see the broken on them.that is nice
Contact Person : Jo Yuan
Phone Number : +86-18706170710
WhatsApp : +8618706170710

20mm Thick Carbon Steel Sheet Plate ASME SA516 Grade Non Deformation For Boiler

Place of Origin: China
Brand Name: JIN LAI
Certification: ISO BV
Model Number: ASME SA516
Minimum Order Quantity: 3 tons
Price: negotiation
Packaging Details: standard packing or as the requirement
Delivery Time: ship withon 10 days after receive the advance
Payment Terms: T/T, Western Union
Supply Ability: 5000 tons per month
Product Details
Length: As Requirement Surface: Oil,black,galvanized
Packing: Standard Seaport Packing Width: 600-2000mm
Standard: AISI, ASTM, BS, DIN, GB, JIS Material: SS400 Q235 Etc
Thickness: 6-400mm Technique: Hot Rolled
High Light:

cold rolled mild steel sheet

,

carbon sheet metal

Leave a Message
Product Description

ASTM A588 Carbon Steel Plate Corrosion Resistant / Atmospheric Resistant

 

 

ASME SA516 grade introduction:
SA516 grade 55, SA516 grade 60, SA516 grade 65, SA516 grade 70. These 4 grades are mainly defined by their different tensile and yield strength range, which is influenced by content of Carbon. For example sa 516 grade 70 has the highest tensile and yield strength range due to the highest Carbon content(up to0.28%). For higher grade like sa516 gr-70 steel plate, preheating might be needed for metal arc welding process, especialy with thick steel plate.

 

Test&Inspection for ASME A516 Steel Plate

Delivery State:
SA516-70n reffers to normalized steel plate product, for steel plate and sheet thinner than 40mm we normally supply them as rolled-steel coil. Plates with thickness above 40mm are supplied normalized. SA516 grade 70 steel plate density is 0.284 cu/in3 (7861 kg/m3).

Mild test:
ASME SA 516-carbon steel plates are manufactured with mill certification following EN10204 3.1 or EN10204 3.2 standard version.
Inspection: MOODY SGS BV GL DNV ABS LIOYD’S Test: X-ray, UT, magnetic particle, inspection.

 

Carbon structural steel plate refers to carbon steel with less than 0.8% carbon, which contains less sulfur, phosphorus and nonmetal inclusions than carbon structural steel, with better mechanical properties.

COR-TEN has served as weathering steel (atmospheric corrosion- resistant steel). Corten steel plate has successfully overcome rust, steel’s most weakest. When exposed to the atmosphere without painting, corten steel begins to rust in the same way as ordinary steel. BUT soon the alloying elements in COR-TEN cause a protective surface layer of the fine-textured rust to form, thereby suppressing corrosion rate. Since its development in 1993, the COR-TEN has been used in every field where steel applied, such as bridges, railway vehicle and buildings. At present, COR-TEN are attracting attention as being suited for resources and environmental concerns as well as reducing life-cycle costs.

Features of COR-TEN

  • Weathering Resistance

Thanks to high weather resistance, corten steel can be used without painting. Unpainted applications are not only offer the economic advantage of reducing repainting costs; they also offer aesthetic benefits associated with the calming color of the protective rust.

  • Paint Durability

COR-TEN is paintable in the same way as ordinary steel. In addition, even if a painting defect should occur, COR-TEN suppresses the progress of rust area and prolongs the services life of paint, thereby reducing repainting costs.

  • Weldability

While trace amounts of alloying elements such as copper (Cu) and chromate (Cr) are added to COR-TEN to ensure high weather resistance, the carbon content is lowered to provide appropriate weldability. Accordingly, COR-TEN can be welded using either manual, gas-shield or submerged arc welding.

  • Workability

COR-TEN possesses workability similar to ordinary steels of same strength.

  • Reliability

Since 1959 when COR-TEN began to be marked, more than 4.8 million tons of this material have been produced. (2015 end)

Unpainted use of Cor-Ten

The unpainted application of corten steel not only offer economic advantages but also demonstrates excellent aesthetic properties. Because of this, COR-TEN is applied in a wide range of fields such as buildings and monuments. COR-TEN can be applied without painting-in a bare state, thus reducing the cost of repainting and other repairs. However, some of our clients have expressed their concerns during the first year or two then the protective lay of fine-textured rust is forming. In order to solve these concerns, supplementary rust stabilization treatment was developed.

Painted use of Cor-Ten

When COR-TEN is painted, the required number of times that repainting must be conducted can be reduced. This advantage is believed to result from the fact that, even when corrosion in the base metal due to defects in the panted film or to pinholes, the corrosion progresses slowly and thus the occurrence of blistering and peeling of the paint film is reduced. By making the most of this advantage. COR-TEN is applied in every field where steel is used-ranging from buildings to railway vehicle, marine containers, storage tanks, industrial machinery and bridges.

ASTM Corten A Chemical Composition
Grade C Max SI Mn S Max Cr Ni Cu Nb Nb+V=Ti
Corten A 0.12 0.25-0.75 0.20-0.50 0.07-0.15 0.030 0.50-1.25 0.65 0.25-0.55 -

 

 

ASTM Corten A Mechanical Properties
Grade Permissible yield point
ratio
Yield Strength
MPa(min)
Tensile Strength
MPa
Elongation
% (min)
Bend
Corten A - 355 470-630 20 1t
Corten A Weathering Steel Parameters
Recommended Bending Radius without Special Requirments
Thickness mm 2-3 4 5 6 7 8 10 12
Radius mm 4 8 10 12 21 24 30 36
ASTM Corten B Chemical Composition
Grade/ Material Element Composition( Max-A, Min-I)
Corten B C A: 0.19
Mn 0.30-0.65
Si 0.80-0.25
P A:0.035
S A:0.030
Al 0.020-0.06
V 0.02-0.10
Cu 0.25-0.40
Cr 0.40-0.65
Ni 0.40
ASTM Corten B Mechanical Properties
Grade/Material Tensile Test Ksi/MPa
Corten B Tensile Strength I:485
Yield Strength I:345
Elongation 19%
Impact Test(if any)  

 

 

ASME SA 516 GR.70-55 Chemical Composition:

Chemical Composition Maximum C % for thickness t (mm) Mn % for
thickness t (mm)
Si % P % max S % max
6-12.5mm 12.5-25mm 25-50mm >50mm ≤12.5mm >12.5mm
ASME A516 Gr
55
0.18 0.20 0.22 0.25 0.55-0.98 0.60-1.30 0.13-0.45 0.035 0.035
ASME A516 Gr 60 0.21 0.23 0.23 0.25 0.6-0.9 0.80-1.20 0.13-0.45 0.035 0.035
ASME A516 Gr
65
0.24 0.26 0.26 0.28 0.85-1.20 0.85-1.20 0.13-0.45 0.035 0.035
ASME A516 Gr
70
0.27 0.28 0.28 0.30 0.85-1.20 0.85-1.20 0.13-0.45 0.035 0.035

ASME SA 516 GR.70-55 Mechanical Property:

Mechanical Property Tensile
strength
(MPa)
Minimum
yield
strength
(MPa)
Minimum elongation (%) gauge length
50mm 200mm
ASME A516 Gr
55
380-515 205 27 23
ASME A516 Gr 60 415 - 550 220 25 21
ASME A516 Gr
65
450 - 585 240 23 19
ASME A516 Gr
70
485 - 620 260 21 17

 

ASTM A516 Grade 70 / ASME SA516 Grade 70 - Specifications and Standards

The specifications and standards of ASTM A516 Grade 70 and ASME SA516 Grade 70 carbon steel plate are outlined in table 1.

Table 1. Equivalent Specifications and Standards of ASTM A516 Grade 70 / ASME SA516 Grade 70

Standard Description
ASTM/ASME A/SA516 - Grade 70
DIN Standard -
British Standard BS1501-224-490A/B
European Norm EN10028 P355GH

ASTM A516 Grade 70 / ASME SA516 Grade 70 - Chemical Composition

The chemical composition of ASTM A516 Grade 70 and ASME SA516 Grade 70 carbon steel plate are listed in table 2.

Table 2. Typical Chemical Composition of ASTM A516 Grade 70 / ASME SA516 Grade 70

Composition Percentage % Composition Percentage %
C 0.10/ 0.22 Cu 0.3
Si 0.6 Ni 0.3
Mn 1/ 1.7 Mo 0.08
P 0.03 Nb 0.01
S 0.03 Ti 0.03
Al 0.02 V 0.02
Cr 0.3    

ASTM A516 Grade 70 / ASME SA516 Grade 70 - Mechanical Properties

The mechanical properties of ASTM A516 Grade 70 and ASME SA516 Grade 70 carbon steel plate are outlined in table 3.

Table 3. Typical Mechanical Values of ASTM A516 Grade 70 / ASME SA516 Grade 70

Properties Value
Tensile Strength (N/mm2) 510/ 650
Yield stress/ min (N/mm2) 335

 

 

 

ASTM A36 steel plate, A36 steel plate, under ASTM standard, we can regard A36 steel plate as Carbon and low alloy steel
A36 steel plate is one mainly of Carbon and low alloy steel, ASTM A36 steel is a widely accepted general purpose structural quality steel offering a constant 36 ksi min. yield point for all thicknesses of material. It is widely used in the construction of buildings, bridges and other structures by means of welding, bolting orriveting. This steel is useful because of its wide availability

A36 steel plate mechanical properties

Yield point, min. Ksi up to & incl. 8" thick 36 over 8" thick 32
Tensile strength,Ksi 58-80
Elongation in 8 in., min., % 20
Elongation in 2 in., min., % 23

A36 steel plate chemical composition

 
Thickness, in
All To 3⁄4 Over Over Over 5⁄2to4incl. Over
3⁄4to3⁄2incl. 3⁄2to5⁄2incl. 4
Carbon, max, % 0.26 0.25 0.25 0.26 0.27 0.29
Manganese, % - - 0.80-1.20 0.80-1.20 0.85-1.20 0.85-1.20
Phosphorus, max, % 0.04 0.04 0.04 0.04 0.04 0.04
Sulfur, max, % 0.05 0.05 0.05 0.05 0.05 0.05
Silicon, % - 0.40 0.40 0.15-0.40 0.15-0.40 0.15-0.40
Copper, min, % 0.20 0.20 0.20 0.20 0.20 0.20

 

 

EN10025 S355JR Mild Steel Hot Rolled Plate Form Supplier In ShangHai

 

Description

 

We sell below various ASTM, JIS, GB, EN, Mild steel sheet and steel coil/alloy steel Plate /ship building structural steel plate with the below comments:

* Plate Thickness from 1.5~300mm. Coil thickness from 1.5~20mm.

* Can cut to size based on less MOQ.

* Can offer Standard of ASTM JIS EN DIN GB and so on.

* Steel grade: Q235B. Q345B. Q420. Q460, SS400, A36, A572.GR.50,S235JR AND ETC.

* Can drilling hole. Cut edge , welding , even galvanizing and other as long as give us processing drawing.

* Fast lead time with reasonable price.

 

Specification

 

Hot Rolled Structural steel Mild Steel Hot Rolled Plate
Steel type Carried standard Steel grade Level Thickness scope
Carbon Structural steel GB/T 700-2006 Q195 - 1.5~20
Q215 A,B 1.5~20
Q235 A,B,C,D 1.5~300
Q275  
EN 100025-2:2004 S235 JR,J0,J2,K2 1.5~300
S275   1.5~300
S355   3.0~300
ASTM A36/A36M-13 A36 - 1.5~300
JIS 3101-2010 SS330 - 1.5~300
SS400 - 1.5~300
SS490 - 3.0~300
SS540 - 3.0~300
GB/T 710-2008 08,08Al,10,15,
20,30,35
- 1.5~200
GB/T 711-2008 08F,08,10F,20,
20Mn,60Mn
- 1.5~120
ASTM A568/A568M-13 SAE1006,SAE1008 - 1.5~300

Low alloy structural

steel

ASTM A568/A568M-13 Q345 A,B,C,D,E 3.0~300
Q390 A,B,C,D,E 4.0~300
Q420  
Q460 C,D,E 6.0~300
Q500  
Q550  
JIS G3106-2008 SM400 A,B,C 1.5~300
SM490 A,B,C 3.0~300
SM520 B,C 6~300
SM570 -
ASTM A572/A572M-13 Gr42 - 1.5~300
Gr50 - 3.0~300
Gr55 - 4.0~300
Gr60 - 4.0~300
Gr65 - 6.0~300
Steel type Carried standard Steel grade Delivery Status Thickness scope

Ship building structural

steel plate

ABS,BV,CCS,

DNV,

GL, KR,LR,

NK RINA,

RS Specifications of ten

classification society

A,B AR 6~40
NR 40~60
D TMCP 6~60
E TMCP 6~60

AH32 AH36 AH40

DH32 DH36.DH40

EH32,EH36EH40
FH32 FH36.FH40

TMCP 6~60


20mm Thick Carbon Steel Sheet Plate ASME SA516 Grade Non Deformation For Boiler 0

 

20mm Thick Carbon Steel Sheet Plate ASME SA516 Grade Non Deformation For Boiler 1

 

If you have any question, please feel free to contact us any time.